WEAR RESISTANCE CONVEYOR BELTS

WEAR RESISTANCE CONVEYOR BELTS

Admin 10/10/2018

Wear resistance conveyor belts are available in many different grades, but they are generally referred to as common conveyors. Wear resistance conveyor belt is preferred for long conveying distance, heavy loading capacity. Besides, the stretch ability is also low, high impact resistance but still fast speed.

1. Wear resistance conveyor belt which are used for general purpose:

Widely used. Suitable for use in normal temperature conditions. However, wear resistance conveyor belts are not suitable for conveying the oil materials, materials with high heat transfer (over 80 ° C), sharp surface, or acid- alkaline materials.

This common wear resistance conveyor belt is equipped with a fabric EP core or steel core. Based on that, they have high tensile strength, low stretch level, high impact resistance, tear resistance, and good abrasion resistance. Due to their special technology, wear resistance conveyor belts have a high degree of consistency and definite link between the surface and core layers (EP fabric or steel). Because they are protected by top and bottom rubber covers, they have extremely high durability and longevity. In addition, the flexing level to create trough cone is also higher.

2. Normal wear resistance conveyor belt:

Suitable for abrasion resistance and conveying of heavy materials such as asbestos, ash, bauxite, cement, lime, etc. However, normal wear resistance conveyors are not recommended for use with oil materials, acid-alkaline or high temperature (above 80oC).

This normal resistance conveyor belt also has an EP fabric or steel core. However, they have higher tensile strength, higher impact resistance, less prone to tearing or wear. Because of the good protection of the top and bottom rubber cover as well as special link of each layers and the core, this rubber conveyor belt has a high durability and longevity. In addition, high flexing also allows this conveyor belt to fit with the rollers.

3. Maximum wear resistance conveyor belt:

Maximum wear resistance conveyor belts have excellent abrasion resistance ability even when they are strong impacted in long conveying distances. In addition, they are also suitable for conveying bulk, heavy, sharp edges, or high abrasive materials (such as coal, glass, etc.).

In general, all the specifications of the maximum wear resistance conveyor belts are higher than those of others (including abrasion resistance, tensile strength, impacted resistance, tear and wear resistance, durability, longevity and flexing).

Specifications of the wear resistance conveyor belts:

Type

Tensile (kg/cm2)

Wear resistance conveyor belts for general purposes

150

Normal wear resistance conveyor belts

200

Maximum wear resistance conveyor belts

250

Thickness:

Number of ply

Top cover (mm)

Bottom cover (mm)

Total (mm)

2

2.5

1.5

6

3

2.5

1.5

7

4

3.5

1.5

9

5

3.5

1.5

10

6

4

2

12

Weight:

Total thickness (mm)

Weight (kg)

6

7.8

7

9.1

8

10.4

9

11.7

10

13

11

14.3

12

15.6

Feel free to contact us here for more detail and order rubber/ PVC conveyor belts which are directly imprted from Japan, Germany, Thailand, etc. by us.  

Chúng tôi có thể giúp gì cho bạn